START UP PROCEDURES
- Flip on breakers marked with green tape backstage (if not already flipped)
- Turn on lighting computer and fader wing (console)
- Open grandMA3 software
- If Epix (LED strips on the wall) are not working, check grandMA3 software:
- Settings menu (top left corner) —> DMX Protocols
- Right click under the “Amount” column, and set it to “20”
- Turn on haze machine and fan side stage
- DO NOT USE HAZE UNLESS NOTIFIED BY CENTRAL
- OPTIONAL: Turn on work lights for more visibility on stage
- Only for before/after service; they should be off during service
- House light control panel is located directly left of the lighting desk on the wall
BREAKERS

LIGHTING COMPUTER/grandMA3 SOFTWARE

FADER WING POWER

HAZE MACHINE POWER
