START UP PROCEDURES

Set up projector screen on stage
Set up folding table for computer at FOH; typically, on the right side of the lighting station, put video rack right next to table. (left side of table)
- All cables and adapters should be found in bottom drawer of the Vox FOH work box near the audio console or in video rack drawer.
Connect USB hub with YELLOW tape to computer
Connect HDMI to USB hub and run to stage display TV at FOH
Connect HDMI to video rack SCREEN OUT and connect to HDMI network extender
Run Cat6 cable from HDMI network extender to network patch labeled “Projector” behind CSMH audio console
Connect the RED USB-C cable to the computer and the Blackmagic UltraStudio Mini Monitor
Connect SDI cable to the Blackmagic UltraStudio Mini Monitor, then to the video rack
Plug Cat6 cable into WAN port on the video rack and the other end into venue ethernet. (behind CSMH audio console labeled tour net)
Once all connected, turn on projector and stage display
Connect 1/8th inch cable into the headphone jack of the computer
Connect 1/4 inch ends into DI Box and run XLRs to audio
Run 6 channel snake from video rack to audio console channels 1-6
Plug blue PowerCon cable into back of video rack and connect to outlet
Power on video rack by pressing gray covered button on the CyberPower device
Press button on front of RESI decoder at bottom of video rack to power it on